The Fastest Cable
Tension Meter
The Dillon Quick-Check can be placed on a
cable, measure its tension, and removed in
under five seconds! There are no complex
lookup tables, no conversion charts. The
operator can quickly select from 15 different
wire sizes and types stored in Quick-Check’s
memory. The Check-Tensioning mode
graphically displays the current and target
tensions for extremely quick setting of
line tension. Even the infrequent battery
changes are quick.
Broad Application
The Quick-Check can be employed in many
industries to ensure proper tensioning.
Typical applications include tower and
stack guy wires, pretensioned cable barriers,
bridges, elevators, winch rope, prestressed
concrete, aircraft cables and utilities.
Capacities and Specifications
Tension capacities:
2000 lb/10 kN/1000 kg
8000 lb/35 kN/3500 kg
Wire sizes: 3/16 inch through 3/4 inch
Accuracy: + 3% instrument capacity
(calibrated to specific wire size & type
+ 5% with same wire diameter as
calibrated but different wire type)
Number of calibrations:
Up to 15 can be stored independently
Operating range:
-4°F to 140°F (-20°C to 60°C)
Loading error:
Cable elongation of only 0.08 inch (2mm)
Display: Dot-graphic LCD display
supports full text and 1 inch high digits.
Sheave range: Sheave accommodates
rated wire size and 1/2” smaller. Sheaves
are not compatible with larger wire sizes
– order additional sheaves for wire sizes.
Suggested wire calibrations:
Calibrate each wire diameter needed with
the most appropriate sheaves. If two wire
types are used of the same diameter (e.g.
½” 7x7 and ½” 6x19), calibrate each type
independently if accuracy is critical.
Environment protection:
Suitable for continued outdoor use.
Tension units of measure:
pound-force, kilogram force, Newtons
Resolution: configurable low/med/high
Recalibration: At user discretion.
Commonly 24 months but should be
more frequently with heavy use. Factory
recalibrations conducted typically in 2-4
days. On-site recalibration may be possible
through your Dillon distributor.