Dynamic Measurement Systems, LLC
  Contact: dyna@dynameasure.com


Motorized Test Stands

Mecmesin’s range of motorised test stands, used in conjunction with a Mecmesin digital force gauge and gripping fixtures provide entry level testing for many simple compressive and tensile tests.

The MultiTest-d features a digital speed controller that is settable in mm/min or in/min with an LCD display that allows for accurate setting of the stands test speed. With the appropriate cables, the stand can be plugged into a PC and an AFG, which allows the use of Dataplot-X to plot load against displacement.

The stand has 3 operation modes- manual, single cycle and continuous cycle mode. The continuous cycle mode can be used to cycle between limits, or loads or a combination of both limits and loads with the stand reverse function of the AFG.

Key Features
  • Easy-to-read LCD screen: digital display of displacement and speed
  • Precise: improved digital speed control
  • Cost-effective: affordable, suitable for businesses with limited resources
  • User-friendly: easy-to-learn and operate even for the infrequent user.
  • Output capability: create load/displacement graphs
  • Robust: rugged enough for the factory floor, sensitive enough for the lab
Available in 1KN to 2.5KN Capacities.
Download the Mecmesin MultiTest-d Brochure (PDF)

MutltiTest 1-d
  • LCD display
  • Speed range 1.0 - 1000mm/min (0.04 - 40.0"/min)
  • 1kN capacity
  • 500mm (19.7") effective crosshead travel
  • 510mm (20.0") maximum headroom
  • 630mm (24.8") daylight space for sample
  • 62mm (2.44") throat depth
  • Adjustable travel limit switches
  • Straightforward to use even for infrequent operators
  • Auto-reverse of crosshead at sample break or pre-defined load point
  • Bench-top machine occupying only a small area
  • Load rating 1000N (220lbf)
 MutltiTest 2.5-d
  • LCD display
  • Speed range 1.0 - 750mm/min (0.04 - 30.0"/min)
  • 330mm (13.0") effective crosshead travel
  • 350mm (13.8") maximum headroom
  • 410mm (16.1") daylight space for sample
  • 70.5mm (2.8") throat depth
  • Adjustable travel limit switches
  • Straightforward to use even for infrequent operators
  • Auto-reverse of crosshead at sample break or pre-defined load point
  • Bench-top machine occupying only a small area
  • Load rating 2500N (550lbf)

Download the Mecmesin MultiTest-d Brochure (PDF)

Dynamic Measurement Systems, LLC
Dynamometers, Crane Scales and Force Measurement equipment
Sales, Service, Rentals 		email: dyna@dynameasure.com
Address: 16515 Hedgecroft, Suite 320
Houston, TX 77060
Phone: 281.405.0606     Fax: 281.405.0303
©2003 Dynamic Measurement Systems