HIGH CAPACITY FORCE GAUGE SERIES CG
The Series CG High Capacity Digital Force Gauge is ideal for heavy duty
spring testing, destructive testing, and other force measurement applications
requiring up to 1,000 lb of tensile or compressive force. These force gauges
include all the advanced features of the Series BG, and are housed in
ultra-rugged reversible aluminum housings for years of use in laboratory or
factory environments.
 |
- RS-232, Mitutoyo and analog outputs
- GCL-Gauge Control Language for full computer control
- Automatic timed output on RS-232
- Dual set points with outputs
- Averaging mode for average readings over time
- External trigger for contact or switch testing and data capture
- General purpose I/O for external device control
- Programmable analog and digital filters
- Selectable units of measurement
- Programmable default configuration
- Peak memory for tensile and compressive forces
- Push-button calibration
- Battery or AC operation
- Programmable automatic shutoff
- Ultra-rugged, reversible aluminum housing
- Same housing size for both capacities (500 lb and 1,000 lb)
- Compatible with test stand models TSF, TSFH, TSA, TSC, and TSCH and grips
- Accuracy: ± 0.2% of full scale ±1 digit
- Sampling rate: 65 readings/sec
- Safe overload: 150% of capacity
- Battery life: 8-10 hours per charge
- Weight: 1.8 lbs (0.8 kg)
-
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity
(non-condensating)
- Warranty: 3 years
- CE mark
|
>>
Force / torque gauge comparison chart (pdf)
OPTIONAL EQUIPMENT
- A wide range of test stands and gripping fixtures
- Hi / lo limits indicator
Set limit conditions for a test - the indicator will display red lights for high and low limits, and a green light to indicate passing.
- Overload protection module
Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with
Mark-10 motorized test stands.
- Set point cable
Stops test stand travel at programmable high and low set points for tension and compression forces. For use with
Mark-10 motorized test stands.
- Output cable
Send test data to a PC, statistical printer, or other
data collector for further analysis.
| CG500 |
Force gauge, 500.0 x 0.2 lbF, 250.0 x 0.1 kgF, 2500 x 1 N |
$1495.00 |
| CG1000 |
Force gauge, 1000.0 x 0.5 lbF, 500.0 x 0.2 kgF, 5000 x 2 N |
$1495.00 |
|
Optional Equipment |
|
09-1047 |
Cable, BG/CG/EG/BGI to Mitutoyo
SPC |
$60.00 |
|
09-1048 |
Cable, BG/CG/EG/BGI to RS-232,
25-pin |
$60.00 |
|
09-1048A |
Cable, BG/CG/EG/BGI to RS-232,
9-pin |
$60.00 |
| 09-1090 |
Cable, set point, BG/BGI/CG to
test stand |
$100.00 |
|
11-1022 | Hi / Lo limits indicator for BG/BGI/CG |
$90.00 |
| 11-1042 |
Overload protection module, BG/CG/EG/BGI to test
stand |
$150.00 |
| |
|
|
For 220V operation add suffix E to model number. Example: CG1000E
Series CG force gauges are supplied in a cushioned carrying case with AC adapter/charger, user's manual,
NIST-traceable certificate
of calibration, and attachments (chisel, cone, V-groove, hook, flat, extension rod, and thread adapter).
|
