Dynamic Measurement Systems, LLC
  Crane Scales       For information on dynamometers, tension meters and crane scales visit Dillon Tension Meters.com


ED Digital Crane Scales Specifications

EDjunior Crane Scale Specifications
Communicator Specifications
Radio Specifications

EDxtreme Crane Scale Specifications:
(PDF download includes ED Junior and dimensions.)

Enclosure: Designed to NEMA4X/IP55. Suitable for continuous outdoor use.

Accuracy: 0.1% of capacity.*

Repeatability: 0.1% of capacity.*
* Normal resolution mode.

Ultimate overload: See table above

Safe overload: 200% of capacity Body protection: Aluminum capacities are anodized. Alloy steel capacities are electroless-nickel plated.

Bearings: Unmatched repeatability attained by needle bearings in shackle pin holes up to EDx-10K. Precision machined shackles act as inner race.

Shackles: Forged industry standard anchor shackle bows, galvanized finish. Models up to EDx-10K use precision machined shackle pin. Higher capacities use forged pin.

Display: 128 x 64 dot-graphic LCD display shows up to 6 digits 1.0” (26 mm) high plus annunciators and softkeys. Digits are .11 inches (7mm) thick for unmatched readability.

Display update rate: 2 times per second.

Connector: Recessed sealed connector may be used for direct serial communications or connection to a Communicator remote.

RS-232 / RS-485 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.

Calibration: Traceable to the National Institute of Standards and Technology. Certificate included with curve of readings. Passes only with three consecutive confirming runs, with all points in specification.

Battery life: 320 hours typical use with two C-cell alkaline batteries. 40 hours typical with Radio Link system.

Operating temperature: -4° F to 140° F (-20° to 60° C)

Included with instrument: Shipping/storage crate(s), batteries, manual and certificate of calibration.

Options: 2.4 GHz radio board. Display backlight.

EDxtreme – Capacity x Resolution
Unit Capacity lb. (kg) Capacity x Resolution
(normal/enhanced)
Ultimate Overload Protection Body Construction
2,500 (1000) 2500 lb x 2/0.5
1000 kg x 1/0.2
10000 N x 10/2
700 % 2024 Aircraft Aluminum
5,000 (2000) 5000 lb x 5/1
2000 kg x 2/0.5
20000 N x 20/5
700 % 2024 Aircraft Aluminum
10,000 (5000) 10000 lb x 10/2
5000 kg x 5/1
50000 N x 50/10
700 % 2024 Aircraft Aluminum
25,000 (10000) 25000 lb x 20/5
10000 kg x 10/2
100000 N x 100/20
500 % E4340 Aircraft Alloy Steel
50,000 (20000) 50000 lb x 50/10
20000 kg x 20/5
200000 N x 200/50
500 % E4340 Aircraft Alloy Steel
Top

Communicator Specifications

Enclosure: Designed to NEMA 3 / IP44 with optional sleeve. Suitable for protected outdoor use.

Instrument size: 9.0 x 4.6 x 1.8 inch (228 x 117 x 45mm).

Accuracy: Not applicable. Only sends and receives digital information.

Display: 128 x 64 dot-graphic LCD display can show full readings up to 5 instruments.

Battery life: 40 hours radio or 45 wireline using four AA alkaline batteries under typical use.

Operating temperature: -4° F to 140° F (-20° to 60° C)

Connectors: Sealed connectors may be used for serial communications and wired connection to an EDxtreme crane scale.

RS-232 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.

Included with remote: Carry case and batteries.

Accessories: Rubberized case protector sleeve. Remote wall mount bracket. Serial and remote cable assemblies.

Update rate from scale: 2 times per second.

Top

Radio Specifications

FCC Certified: For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.)

Frequency: 2.4 GHz spread-spectrum operates between 2.402 – 2.478 GHz. Continuously and automatically changes frequencies many times per second for consistent, reliable communications.

Output level: 10 mW (20 dBm)

Display update rate: 2 times per second with single dynamometer. Multiinstrument networks result in reduced updates.

Number of networks: 63 remotes can operate independently in the same airspace with unique channels.

Number of links remote can control: Up to 15 addresses are available per network channel.

Configuration: Address and Network channels are front-panel configurable.

Antenna: Integral antenna. Range Open-air – Up to 300 feet, line-of-sight. Indoors – Dependent upon installation site with 150 feet common.

Approval: FCC ID: KQL-PKLR2400. CAN ID: CAN2268391158A

Top

EDjunior Crane Scale Specifications

Enclosure: Designed to NEMA4X/IP55. Suitable for continuous outdoor use.

Accuracy: 0.2% of capacity.

Repeatability: 0.2% of capacity.

Ultimate overload: 700%, 500% for 25K lb.

Safe overload: 200%

Display: 128 x 64 dot-graphic LCD display shows all digits 1.0” (26 mm) high plus annunciators and softkeys.

Display update rate: 2 times per second.

RS-232 communication: Not available. See Dillon EDx Crane Scale.

Calibration: Traceable to the National Institute of Standards and Technology. Calibration card included.

Battery life: 320 hours typical use with two C-cell alkaline batteries.

Operating temperature: -4° F to 140° F (-20° to 60° C)

Included with instrument: Batteries, manual and calibration card.

Optional accessories: Shipping / storage crate.

EDjunior – Capacity x Resolution
Unit Capacity lb. (kg) Capacity x Resolution Ultimate Overload Protection Body Construction
2,500 (1000) 2500 lb x 2
1000 kg x 1
10000 N x 10
700 % 2024 Aircraft Aluminum
5,000 (2000) 5000 lb x 5
2000 kg x 2
20000 N x 20
700 % 2024 Aircraft Aluminum
10,000 (5000) 10000 lb x 10
5000 kg x 5
50000 N x 50
700 % 2024 Aircraft Aluminum
25,000 (10000) 25,000 lbf x 10
10000 kgf x 5
100,000 N x 50
500 % E4340 Alloy Steel
Top

Phone: 281.405.0606
Fax: 281.405.0303
email: sales@dynameasure.com

Dynamic Measurement Systems, LLC
Dynamometers, Crane Scales and Force Measurement equipment
Sales, Service, Rentals
email: dyna@dynameasure.com
Address: 16515 Hedgecroft, Suite 320
Houston, TX 77060
Phone: 281.405.0606 Fax: 281.405.0303

©2003 Dynamic Measurement Systems