3360 Digital Crane Scale Specifications
Download PDF version. Contains dimensional drawings
STANDARD PRODUCT
SPECIFICATIONS
Accuracy: Plus or minus 0.1% of applied load
Display: 5 digit, 1.2 in/30 mm high manual
or photocell LED brightnes control
Filtering: Low, Medium or High selectable
Units: Pounds or Kilograms selectable
Resolution: 2000 or 2500 divisions standard
(up to 10,000 available)
Power: 6 volt rechargeable battery
(115 or 230 VAC charger included)
Operating Time:
50 hrs. min./100 hrs. max.
(depends on operating mode)
Auto-Off Mode:
Select for 12 min., 1 hr. or Off
Auto-Sleep Mode:
Power down during non-use and
power up with motion for
maximum battery conservation
Service Counter:
Registers number of lifts by value
for inspection and maintenance
reminder
Operating Temperature Range:
-4° to +122° F (-20° to +50°C)
Enclosure: NEMA 12/IP54 powder coated
Alodined Cast Aluminum
Hook: Crosby-Laughlin or equivalent
360° non-bearing swivel
Safe Overload:
200% of rated capacity
Ultimate Overload:
500% of rated capacity
FUNCTION SWITCHES
AND LIGHTS
POWER: Turns unit ON or OFF
ZERO: Zeros applied load up to 100% of
capacity (limited range with NIST or
OIML option)
TARE: Tares out applied load and displays
weight in Net mode. Push again to
return to Gross mode
USER: User programmable multifunction
switch for use as TEST, UNIT select,
TOTAL (auto or manual), PEAK HOLD
and SET POINTS
ANNUNCIATORS:
Center of Zero, Net, Gross, Total,
Peak, x 1000, Battery, lb/kg, Motion,
SP1 and SP2
OPTIONS AND ACCESORIES
• NTEP (86-021A2), OIML and EC (T2943)
approved versions (Contact factory for
specifications)
• Infrared remote controller with 8 meter
operating range
• 115 or 230 VAC input power
• Special capacity or displayable resolution
Phone: 281.405.0606
Fax: 281.405.0303
email:
sales@dynameasure.com
|
